Intelligent Materials Design Laboratory

2025

[175] S.H. Lee, J.H. Shin S.J. Lee, J.G. Jung, Precipitation behavior and mechanical property anisotropy of Al–Zn–Mg–Cu alloy forgings, Mater. Sci. Eng. A, 926 (2025) 147957.

[174] N. Seo, S.H. Lee, J. Lee, S. Park, M.S. Kim, S.J. Lee, J.G. Jung, Microstructural evolution and aging behavior of multicomponent Al–Sn–Zn–Mg–Li alloy, J. Alloys Compd., 1011 (2025) 178381

[173] Y. Sung, C. Kang, J. Lee , S. Park , S.H. Lee, J.T. Im, S.J. Lee, H.J. Jang, J.G. Jung, Microstructural characterization of corrosion resistant Zn–15Al–6Mg–0.4Si galvanized coating, J. Mater. Res. Technol., 34 (2025) 738–747.

[172] S.H. Lee, T.Y. Ahn, S.I. Baik, D.N. Seidman, S.J. Lee, Y.K. Lee, K. Euh, J.G. Jung, Unravelling precipitation behavior and mechanical properties of
Al–Zn–Mg–Cu alloy, J. Mat. Sci. Tech., 204 (2025) 177-189.

2024

[171] J. Jeon, S.H. Lee, S.D. Kim, Z. Mao, D.N. Seidman, K. Kim, Y.H. Cho, S.H. Kim, K. Euh, J.M. Lee, S.J. Lee, J.G. Jung, Ultrasound alters the nucleation pathway of primary Mg2Si in a chemically modified multicomponent Al–Mg2Si alloy, J. Alloys Compd., 1009 (2024) 177001.

[170] 박성현, 이상화, 이준호, 이석재, 정재길, 소결 조건에 따른 FeCrMnNiCo 고엔트로피 합금의 미세조직 변화, 한국분말재료학회지, 31 (2024) 406-413.

[169] N. Seo, J. Lee, S. Park, S.H. Lee, M.S. Kim, S.J. Lee, J.G. Jung, Microstructural evolution and precipitation behavior of multicomponent Al83Mg5Si5Cu5Li2 alloy, Mater. Lett., 375 (2024 ) 137205.

[168] 최정후, 김성진, 김민희, 박재현, 신재혁, 류민환, 신우철, 김민욱, 이석재, 정재길, SCR420H강의 미세조직과 결정립 조대화에 미치는 Ti 첨가 영향, 열처리공학회지, 37 (2024) 163-171.

[167] 김성진, 최정후, 김민희, 류민환, 박재현, 신재혁, 신우철, 김민욱, 정재길, 이석재, Nb 첨가 합금강의 미세조직과 결정립 조대화 거동, 열처리공학회지, 37 (2024) 155-162.

[166] S.H. Lee, N. Seo, M. Kang, S.B. Son, S.J. Lee, J.G. Jung, Natural aging-induced nanoprecipitation and its impact on tensile properties of Al-Si-Cu-Mg cast alloy, Mater. Charact., 215 (2024) 114204.

[165] J. Lee, S. Park, S.H. Lee, S.B. Son, H. Kwon, S.J. Lee, J.G. Jung, Microstructural evolution and thermal stability of Al–Zn–Mg–Cu–Si–Zr alloy fabricated via spark plasma sintering, J. Mater. Res. Technol., 31 (2024) 205–212.

[164] 최승혁, 이상화, 정재길, 이석재, 손승배, 방전 플라즈마 소결과 압축 성형 방법으로 제조된 알루미늄 다공체의 구조적, 기계적 특성 연구, 대한금속재료학회지 62 (2024) 533-541.

[163] J.H. Kim, H.N. Choi, K.J. Lee, J. Shin, N. Seo, J.G. Jung, S.J. Lee, S.J. Lee, Effect of welding speed on microstructural evolution and strengthening mechanism of friction-stir welded 7075 aluminum, Mat. Sci. Eng. A, 908 (2024) 146695.

[162] 전준협, 손승배, 이석재, 정재길, 고진공 고압 다이캐스팅으로 제조된 AA365 합금의 미세조직과 기계적 특성에 미치는 T6 열처리의 영향, 열처리공학회지, 37 (2024) 121-127.

[161] 전준협, 손승배, 정재길, 이석재, 설명가능한 인공지능을 통한 마르텐사이트 변태 온도 예측 모델 및 거동 분석 연구, 열처리공학회지, 37 (2024) 103-113.

[160] C.W. Lee, S.J. Lee, I.J. Kim, J, Kim, Determination of joint defects in copper tube induction heating brazing area using infrared thermal inmage based on CNN algorithm, Int. J. Precis. Eng. Manuf., 25 (2024) 687-697.

[159] J. Lee, W. Shin, J. Jeon, S.B. Son, S.J. Lee, J.G. Jung, Effect of mechanical milling on the microstructure evolution of Al-Zn-Mg-Cu-Si alloy fabricated via spark plasma sintering, Powder Metall., 67 (2024) 60-69.

[158] J. Lee, N. Seo, S.H. Lee, K. Euh, S. Kang, S.B. Son, S.J. Lee, J.G. Jung, Effect of Al–5Ti–1B addition on solidification microstructure and hot deformation behavior of DC-cast Al–Zn–Mg–Cu alloy, Arch. Metall. Mater., 69 (2024) 145-149.

2023

[157] 이준호, 박성현, 이상화, 손승배, 이석재, 정재길, Al-Zn-Mg-Cu-Si 소결합금의 미세조직과 기계적 특성에 미치는 열처리의 영향, 한국분말재료학회지, 30 (2023) 470-477.

[156] 이승표, 이석재, 김태범, 조균택, 상변태를 고려한 베어링의 열처리 변형 해석, 열처리공학회지, 36 (2023) 351-358.

[155] J. Jeon, Y. Sung, N. Seo, J.G. Jung, S.B. Son, S.J. Lee, Machine learning model and prediction mechanisms of bainite start temperature of low alloy steels, Mater. Trans., 64 (2023) 2214-2218.

[154] K. Cho, S.J. Lee, Finite element simulation of quench distortion of cut-cylinder 4340 steel, Mater. Trans., 64 (2023) 2202-2205.

[153] J. Jeon, N. Seo, J.G. Jung, S.B. Son, S.J. Lee, Analysis of prediction mechanisms and feature importance of martensite start temperature of alloy steel via explainable artificial intelligence, Mater. Trans., 64 (2023) 2196-2201.

[152] D.H. Jung, W.J. Oh, J.S. Kyeong, S.J. Lee, Classification of surface fracture in plastics using convolutional neural networks, Mater. Trans., 64 (2023) 2191-2195.

[151] 성윤제, 김동규, 서준기, 한경현, 홍범기, 김강민, 허성욱, 박성현, 임재택, 손승배, 이석재, 정재길, 알루미늄과 마그네슘 첨가가 용융아연 도금강판 도금층의 미세조직과 경도에 미치는 영향, 열처리공학회지, 36 (2023) 198-205.

[150] 전준협, 서남혁, 김민수, 손승배, 정재길, 이석재, 레이저 분말 베드 용융법으로 제조된 AlSi10Mg 합금의 경도 예측을 위한 설명 가능한 인공지능 활용, 한국분말재료학회지, 30 (2023) 210-216.

[149] G.W. Jung, W. Shin, J. Lee, J.G. Jung, S.J. Lee, J. Park, Microstructure and mechanical properties of oxide dispersion strengthened Ni–20Cr–1.2Y2O3 alloys with novel powder production routes, Mater. Charact., 199 (2023) 112024.

[148] N. Seo, J. Jeon, S.H. Lee, K. Euh, T.Y. Ahn, S.B. Son, S.J. Lee, J.G. Jung, Revealing complex precipitation behavior of multicomponent Al83Zn5Cu5Mg5Li2 alloy, J. Alloys Compd., 944 (2023) 169192.

[147] 박정빈, 전준협, 이주헌, 손승배, 이석재, 정재길, 반복 템퍼링이 AISI 4340 강의 미세조직과 기계적 특성에 미치는 영향, 열처리공학회지, 36 (2023) 7-14.

[146] J. Park, J. Jeon, N. Seo, S. Kang, S.B. Son, S.J. Lee, J.G. Jung, Microstructure and mechanical behavior of AISI 4340 steel fabricated via spark plasma sintering and post-heat treatment, Mater. Sci. Eng. A, 862 (2023) 144433.

[145] S.M. So, K.Y. Kim, S.J. Lee, Y.W. Kim, M.S. Oh, Improvement of weldability of hot-dip galvanized steel by anti-galvanizing coating with Si-Fe-Al oxide-based micropowder, Arch. Metall. Mater., 68 (2023) 155-159.

[144] J. Park, J. Jeon, N. Seo, G. Kim, S.B. Son, J.G. Jung, S.J. Lee, Austenitic stability and strain-induced martensitic transformation behavior of nanocrystalline FeNiCrMoC HSLA steels, Arch. Metall. Mater., 68 (2023) 77-80.

[143] G. Kim, J. Park, S.J. Lee, H.S. Kim, Microstructure and hardness of Cu-22Sn-xC alloys fabricated by powder metallurgy, Arch. Metall. Mater., 68 (2023) 71-75.

2022

[142] 신우철, 손승배, 정재길, 이석재, 방전 플라즈마 소결로 제조된 나노결정 Fe-7wt.%Mn 합금의 오스테나이트 안정성에 미치는 Mo 첨가 효과, 한국분말재료학회지, 29 (2022) 517-522.

[141] 김성민, 차은지, 권도훈, 홍성욱, 이연주, 이석재, 이기안, 김휘준, Optimization of VIGA process parameters for power characteristics of Fe-Si-Al-P soft magnetic alloy using machine learning, 한국분말재료학회지, 29 (2022) 459-467.

[140] 전준협, 이준호, 서남혁, 손승배, 정재길, 이석재, IN 939W 합금의 소결 승온 속도에 따른 물리적 특성과 미세조직 분석, 한국분말재료학회지, 29 (2022) 399-410.

[139] 서남혁, 이준호, 신우철, 전준협, 박정빈, 손승배, 정재길, 이석재, 다른 크기의 분말 적층을 통해 얻은 Fe-6Mn합금의 경사 미세조직과 기계적 특성, 한국분말재료학회지, 29 (2022) 382-389.

[138] J. Jeon, N. Seo, J.G. Jung, H.S. Kim, S.B. Son, S.J. Lee, Prediction and mechanism explain of austenite-grain growth during reheating of alloy steel using XAI, J. Mater. Res. Technol., 21 (2022) 1408-1418.

[137] J. Jeon, N. Seo, S.B. Son, J.G. Jung, S.J. Lee, Application of explainable artificial intelligence for prediction and feature analysis of carbon diffusivity in austenite, J. Mat. Sci., 57 (2022) 18142-18153.

[136] M.W. Lee, Y.S. Choi, D.H. Kwon, E.J. Cha, H.B. Kang, J.I. Jeong, S.J. Lee, H.J. Kim, The prediction of optimized metalloid content in Fe-Si-B-P amorphous alloys using artificial intelligence algorithm, Arch. Metall. Mater., 67 (2022) 1539-1542.

[135] Y.S. Choi, D.H. Kwon, M.W. Lee, E.J. Cha, J. Jeon, S.J. Lee, J. Kim, H.J. Kim, A study on the optimization of metalloid contents of Fe-Si-B-C based amorphous soft magnetic materials using artificial intelligence method, Arch. Metall. Mater., 67 (2022) 1459-1463.

[134] J. Jeon, N. Seo, J.G. Jung, S.B. Son, S.J. Lee, Machine learning prediction for cementite precipitation in austenite of low alloy steels, Mater. Trans., 63 (2022) 1369-1374.

[133] J. Kim, D. Min, S. Park, J. Jeon, S.J. Lee, Y. Kim, H.J. Kim, Y. Kim, H. Choi, Optimization of densification behavior of a soft magnetic powder by discrete element method and machine learning, Mater. Trans., 63 (2022) 1304-1309.

[132] J.H. Jung, S.J. Lee, H.S. Kim, Estimation of average grain size from microstructure image using convolutional neural network, Materials, 15 (2022) 6954.

[131] 전준협, 김동응, 홍준호, 김휘준, 이석재, 기계학습 모델 복잡도에 따른 템퍼트 마르텐사이트 경도 예측 정확도 비교 연구, 대한금속재료학회지, 60 (2022) 713-721.

[130] 김정준, 이연주, 김송이, 이종재, 김재헌, 이석재, 임현규, 이민하, 김휘준, 최현주, 열처리를 통한 Ni/Fe계 하이브리드 용사 코팅층의 기계적 특성 및 내식성 향상, 한국분말재료학회지, 29 (2022) 240-264.

[129] 전준협, 이준호, 서남혁, 손승배, 정재길, 이석재, 침탄 공정 대체를 위한 방전 플라즈마 소결 방법, 한국분말재료학회지, 29 (2022) 219-225.

[128] H.W. Lee, T.M. Park, N. Seo, S.J. Lee, C. Lee, J. Han, Design of low-Ni martensitic steels with novel cryogenic impact toughness exceeding 190 J, Mater. Sci. Eng. A, 840 (2022) 142959.

[127] J. Jeon, G. Kim, N. Seo, H. Choi, H.J. Kim, M.H. Lee, H.K. Lim, S.B. Son, S.J. Lee, Combined data-driven model for the prediction of thermal properties of Ni-based amorphous alloys, J. Mater. Res. Technol., 16 (2022) 129-138.

2021

[126] 김정준, 김송이, 이종재, 이석재, 임현규, 이민하, 김휘준, 최현주, 철계 비정질 분말을 활용한 초고속 용사 코팅층 개발, 한국분말재료학회지, 28 (2021) 483-490.

[125] 전준협, 서남혁, 이종재, 손승배, 이석재, HVOF 용사 코팅 공정 조건에 따른 코팅층의 기공도 예측, 한국분말재료학회지, 28 (2021) 478-482.

[124] D. Kim, H. Maeng, Y. Choi, H. Choi, S.J. Lee, Constitutive model of triple-step-aged Al-Mg-Si alloy incorporating precipitation kinetics, Metals Mater. Int., 27 (2021) 4577-4585. ‌

[123] 박정빈, 전준협, 서남혁, 김광훈, 손승배, 이석재, 방전플라즈마소결로 제조된 나노결정 FeNiCrMoMnSiC 합금의 오스테나이트 안정성과 기계적 특성, 한국분말재료학회지, 28 (2021) 336-341.

[122] S.W. Kim, S.J. Lee, D.U. Kim, M.S. Kim, Experimental investigation on tensile properties and yield strength modeling of T5 heat-treated counter pressure cast A356 aluminum alloys, Metals, 11 (2021) 1192.

[121] 최승규, 김광훈, 김진평, 김세훈, 손승배, 이석재, T6 열처리에 의한 Al-Mg-Si 합금의 비등방성 석출물 형상을 고려한 확률 의존적 석출강화효과, 대한금속재료학회지, 59 (2021) 515-523. ‌

[120] J. Jeon, N. Seo, S.B. Son, S.J. Lee, M. Jung, Application of machine learning algorithms and SHAP for prediction and feature analysis of tempered martensite hardness in low-alloy steels, Metals, 11 (2021) 1159.

[119] 김광훈, 전준협, 서남혁, 박정빈, 손승배, 이석재, 소성유기마르텐사이트 변태에 의한 나노결정 FeCrC 소결합금의 기계적 강도 향상, 한국분말재료학회지, 28 (2021) 246-252.

[118] 서남혁, 전준협, 김광훈, 박정빈, 손승배, 이석재, 철계 비동일분율 고엔트로피 합금의 인장 강도에 미치는 소결 조건 영향, 한국분말재료학회지, 28 (2021) 221-226.

[117] J. Kim, J. Jeon, Y. Lee, S.J. Lee, Y. Kim, H.J. Kim, Y. Kim, H. Choi, Computational approach to increase the packing fractions of amorphous powders, Powder Metall., 64 (2021) 185-191.

[116] N. Seo, G. Kim, S. Choi, J. Jeon, M.S. Oh, S.B. Son, S.J. Lee, Mechanical properties and microstructural characteristics of non-equiatomic high-entropy Alloy FeMnCoCrC prepared by powder metallurgy, Powder Metall., 64 (2021) 180-184.

[115] 김송이, 오혜령, 이아영, 장하늘, 이석재, 김휘준, 이민하, Effect of critical cooling rate on the formation of intermetallic phase during rapid solidification of FeNbHfBPC alloy, 한국주조공학회지, 41 (2021) 235-240.

[114] G. Kim, J. Jeon, N. Seo, S. Choi, M.S. Oh, S.B. Son, S.J. Lee, Effect of sintering holding time and cooling rate on the austenite stability and mechanical properties of nanocrystalline FeCrC alloy, Arch. Metall. Mater., 66 (2021) 759-763.

[113] J. Jeon, N. Seo, H.J. Kim, M.H. Lee, H.K. Lim, S.B. Son, S.J. Lee, Inverse design of Fe-based bulk metallic glasses using machine learning, Metals, 11 (2021) 729.

[112] J.W. Youn, S.J. Lee, K.S. Kim, J.W. Han, D.U. Kim, A study on the change of VO2 thin-film coating behavior according to the droplet size using ultrasonic spray, Appl. Phys. A, 127 (2021) 283.

[111] 서남혁, 전준협, 김광훈, 박정빈, 손승배, 이석재, 밀링 조건이 고엔트로피 합금의 미세조직 및 기계적 특성에 미치는 영향, 한국분말재료학회지, 28 (2021) 1-7.

[110] S. Choi, J. Jeon, N. Seo, S.B. Son, S.J. Lee, Effect of heating rate on microstructure and mechanical properties in Al 7055, Metals Mater. Int., 27 (2021) 449-455.

[109] J.W. Youn, S.J. Lee, K.S. Kim, D.U. Kim, J.W. Han, A study on the coating characteristics of VO2 nanoparticle thin film with various conditions of ultrasonic spray coater, J. Nanosci. Nanotechnol., 21 (2021) 3010-3015.

[108] S.J. Lee, M. Jung, Prediction of martensite start temperatures of highly alloyed steels, Arch. Metall. Mater., 66 (2021) 107-111.

2020

[107] 서남혁, 최승규, 전준협, 윤상일, 김동현, 김태영, 손승배, 이석재, 다이캐스팅으로 제조된 Silafont-36 합금의 기계적 특성에 미치는 T6 열처리 영향, 공학기술논문지, 13 (2020) 173-178.

[106] 최승규, 서남혁, 전준협, 손승배, 이석재, 철계 소결합금의 오스테나이트 안정성, 한국분말재료학회지, 27 (2020) 414-419.

[105] M.S Jeong, T.M. Park, S. Choi, S.J. Lee, J. Han, Recovered ductility of medium-Mn steels by restoring original microstructure, Scr. Mater.,190 (2020) 16-21.

[104] S.M. So, K.Y. Kim, S.J. Lee, Y.J. Yu, H.A. Lim, M.S. Oh, Effects of Sn content and hot deformation on microstructure and mechanical properties of binary Cu-Sn alloys with high Sn content, Mater. Sci. Eng. A, 796 (2020) 140054.

[103] J. Jeon, S. Choi, N. Seo, Y.H. Moon, I.J. Shon, S.J. Lee, Effects of TiC addition on strain-induced martensite transformation and mechanical properties of nanocrystalline Fe-Mn alloy fabricated by spark plasma sintering, Arch. Metall. Mater., 65 (2020) 1249-1254.

[102] S. Choi, J. Jeon, N. Seo, Y.H. Moon, I.J. Shon, S.J. Lee, Effect of composition on strain-induced martensite transformation of FeMnNiC alloys fabricated by powder metallurgy, Arch. Metall. Mater., 65 (2020) 1001-1004.

[101] N. Seo, J. Jeon, S. Choi, Y.H. Moon, I.J. Shon, S.J. Lee, Microstructural and mechanical characteristics of non-equiatomic high entropy alloy FeMnCoCr prepared by spark plasma sintering, Arch. Metall. Mater., 65 (2020) 1005-1009.

[100] C.S. Park, C.J. Van Tyne, S.J. Lee, T. Lee, J.H. Kim, Y.H. Moon, Prediction of tempcore rebar strength using a thermomechanical simulator with a designed hollow specimen, Steel Res. Int., 91 (2020) 1900520.

2019

[099] 오승진, 전준협, 손인진, 이석재, 나노결정 FeMnNiC합금의 오스테나이트 안정성, 한국분말재료학회지, 26 (2019) 389-394.

[098] H. Maeng, Y. Choi, S.J. Lee, Model of precipitation hardening of Al-Mg-Si alloys under aging, Metal Sci. Heat Treat., 61 (2019) 455-460.

[097] J.W. Youn, S.J. Lee, K.S. Kim, D.U. Kim, Effect of annealing condition on the crystallinity of VO2 (β) thin-films fabricated by a solution-based process, Jpn. J. Appl. Phys., 58 (2019) 105501.

[096] Z.S. Park, S.J. Lee, T. Lee, J.H. Kim, Y.H. Moon, Fabrication of long tubular parts made of tungsten-heavy alloys by inductive bonding of multiple tube, Int. J. Refract. Met. Hard Mater., 85 (2019) 105058.

[095] S.J. Oh, B.C. Kim, M.C. Suh, I.J. Shon, S.J. Lee, Influence of carbon content on austenite stability and strain-induced transformation of nanocrystalline FeNiC alloy by spark plasma sintering, Arch. Metall. Mater., 64 (2019) 863-867.

2018

[094] 김근학, 박동성, 오승진, 전준협, 윤상일, 김기선, 김태영, 이석재, 아공정 Al-Si-Cu-Mg 합금의 액상선 온도 곡선 예측, 열처리공학회지, 31 (2018) 300-306.

[093] 김근학, 박동성, 전중환, 이민하, 이석재, 공구강의 고온 변형 거동 예측을 위한 모델 비교 연구, 열처리공학회지, 31 (2018) 180-186.

[092] 오승진, 손인진, 이석재, Fe-7%Mn 합금의 오스테나이트 안정성에 미치는 밀링 시간과 공정제어제 첨가 효과, 한국분말재료학회지, 25 (2018) 126-131.

[091] 이운재, 이석재, 인공 신경망 모델을 활용한 조미니 곡선 예측, 열처리공학회지, 31 (2018) 1-5.

[090] J.W. Youn, S.J. Lee, K.S. Kim, D.U. Kim, Manufacturing optimization of VO2 nanoink for thermochromic smart window based on solution process, Nanosci. Nanotechnol. Lett., 10 (2018) 1267-1272.

[089] S.Y. Seo, S.J. Lee, Effects of Ti and Nb on the grain refinement and mechanical properties of AISI 4145 steel, Trans. Indian Inst. Met., 71 (2018) 3037-3043.

[088] D. Park, S.J. Oh, I.J. Shon, S.J. Lee, Effect of Ni content on the austenite stability and mechanical properties of nanocrystalline Fe-Ni alloy fabricated by spark plasma sintering, Arch. Metall. Mater., 63 (2018) 1479-1482.

[087] M. Jung, S.J. Lee, W.B. Lee, K.I. Moon, Finite element simulation and optimization of gas-quenching process for tool steels, J. Mater. Eng. Perform., 27 (2018) 4355-4363.

[086] K. Kim, S.J. Oh, D. Park, I.J. Shon, S.J. Lee, Effects of milling time and process control agent on the austenite stability of nanocrystalline Fe-10%Mn alloy obtained via spark plasma sintering, Mater. Trans., 59 (2018) 1206-1209.

[085] S.J. Oh, J.H. Jun, M.H. Lee, I.J. Shon, S.J. Lee, Microstructure and mechanical properties of highly alloyed FeCrMoVC steel fabricated by spark plasma sintering, Metals Mater. Int., 24 (2018) 597-603.

[084] S.J. Oh, D. Park, K. Kim, I.J. Shon, S.J. Lee, Austenite stability and mechanical properties of nanocrystalline Fe–Mn alloy fabricated by spark plasma sintering with variable Mn content, Mater. Sci. Eng. A, 725 (2018) 382-388.

[083] Y.H. Kang, S.J. Lee, Constitutive model for densification kinetics of copper powder, Appl. Mech. Mat., 876 (2018) 41-45.

[082] J.W. Youn, S.J. Lee, K.S. Kim, D.U. Kim, Adhesion characteristics of VO2 ink film sintered by intense pulsed light for smart window, Appl. Surf. Sci., 441 (2018) 508-514.

[081] J. Park, J.H. Shim, S.J. Lee, New equation for prediction of martensite start temperature in high carbon ferrous alloys, Metall. Mater. Trans. A, 49 (2018) 450-454.

2017

[080] 김근학, 정민수, 이석재, 구성 모델과 공정 지도를 이용한 AISI 4340강의 고온 변형 거동, 열처리공학회지, 30 (2017) 187-196.

[079] 박동성, 전중환, 이민하, 이석재, 고합금 공구강의 최적 오스테나이트 처리 온도 결정, 열처리공학회지, 30 (2017) 156-163.

[078] H. Park, D. Park, J.H. Jun, M.H. Lee, S.J. Lee, A microstructure-based constitutive model for high-alloyed FeCrMoVC, Mater. Res. Express, 4 (2017) 116504.

[077] H. Maeng, S.J. Lee, Aging parameter for evaluating age hardening in Al alloys, Mater. Res. Express, 4 (2017) 076509.

[076] K. Kim, S.J. Lee, Effect of Ni addition on the mechanical behavior of quenching and partitioning (Q & P) steel, Mater. Sci. Eng. A, 698 (2017) 183-190.

[075] S. Kang, M. Kim, S.J. Lee, Microstructural and mechanical characteristics of novel 6%Cr cold-work tool steel, Metals, 7 (2017) 12.

[074] I.J. Shon, S.J. Lee, Rapid consolidation of nanostuctured WC-FeAl3 by pulsed current activated heating and its mechanical properties, Int. J. Refract. Metals Hard Mater., 65 (2017) 69-75.

2016

[073] 소상진, 신정호, 임재원, 이석재, 고농도 침탄강의 탄화물 형성과 피팅 피로강도에 미치는 탄소 포텐셜의 영향, 열처리공학회지, 29 (2016) 113-123.

[072] 곽봉원, 이석재, 손인진, 급속 가열에 의한 나노구조의 AlCr2-Al2O3 복합재료 합성과 소결 및 기계적 특성, 대한금속재료학회지, 54 (2016) 313-321.

[071] S. Kang, K. Kim, Y.I. Son, S.J. Lee, Application of the quenching and partitioning (Q&P) process to D6AC steel, ISIJ Inter., 56 (2016) 2057-2061.

[070] S. Yoon, S. Kang, Y. Choi, H. Choi, S.J. Lee, Effect of relative density on microstructure and mechanical properties of Fe-12Mn-0.2C alloy fabricated by powder metallurgy, Powder Tech., 298 (2016) 106-111.

[069] M. Kim, J.H. Shin, Y. Choi, S.J. Lee, Improvement of mechanical properties of spheroidized 1045 steel by induction heat treatment, Metall. Mater. Trans. A, 47A (2016) 1761-1769.

[068] K.D. Clarke, C.J. Van Tyne, S.J. Lee, Correlation between crystal structure change and transformation strain for multiphase transformations, JOM, 68 (2016) 198-202.

2015

[067] J. Park, G. Jeong, S. Kang, S.J. Lee, H. Choi, Fabrication of Fe-Cr-Mo powder metallurgy steel, Metals Mater. Int., 21 (2015) 1031-1037.

[066] S.J. Lee, K.D. Clarke, A quantitative investigation of cementite dissolution kinetics for continuous heating of hypereutectoid steel, Metall. Mater. Trans. A, 46A (2015) 3917-3923.

[065] S. Kang, M. Kim, S.J. Lee, Density dependency of tempered martensite hardness in sintered carbon steel, Mater. Trans., 56 (2015) 1174-1178.

[064] J.G. Jung, S.J. Lee, Thermodynamic based prediction of nitrogen diffusivity in α-ferrite, J. Iron Steel Res., Int., 22 (2015) 743-745.

[063] J.H. Jung, J.H. Shin, S.J. Lee, Improvement of anisotropic mechanical behavior by sulfide control in quenched and tempered 4340 steels, J. Mater. Eng. Perform., 24 (2015) 2658-2664.

2014

[062] Y. Kang, S. Yoon, M. Kim, S.J. Lee, Plastic deformation behavior of sintered Fe-based alloys for light-weight automotive components, Appl. Sci. Converg. Technol., 23 (2014) 151-159.

[061] S.M. Kwon, S.J. Lee, I.J. Shon, Enhanced properties of nanostructured ZrO2–graphene composites rapidly sintered via high-frequency induction heating, Ceram. Int., 41 (2015) 835-842.

[060] H.S. Kang, S.J. Lee, I.J. Shon, Rapid synthesis and consolidation of nanostructured (Mo,W)Si2 by high-frequency induction heated sintering and its mechanical properties, J. Ceram. Process. Res., 15 (2014) 286-289.

[059] H.S. Kang, J.M. Doh, J.K. Yoon, S.J. Lee, I.J. Shon, Simultaneously rapid synthesis and consolidation of nanostructured MgAl2Ti3O10-Mg0.6Al0.8Ti1.6O5 composite and its mechanical properties, J. Ceram. Process. Res., 15 (2014) 246-250.

[058] S. Yoon, S.J. Lee, Effect of Cu addition on soft magnetic properties of Fe-Zr-Si amorphous alloy, Mater. Trans., 55 (2014) 1517-1519.

[057] S. Kang, S.J. Lee, Prediction of tempered martensite hardness incorporating the composition-dependent tempering parameter in low alloy steels, Mater. Trans., 55 (2014) 1069-1072.

[056] S. Yoon, S.J. Lee, Improved thermodynamic formula for austenite/(austenite+cementite) phase boundary in low alloy steels, ISIJ Inter., 54 (2014) 1453-1455.

[055] S. Kang, S. Yoon, S.J. Lee, Prediction of bainite start temperature in alloy steels with different grain sizes, ISIJ Inter., 54 (2014) 997-999.

[054] S.J. Lee, Effect of latent heat related to solidification kinetics on heat transfer during solidification of Al alloy, Adv. Mat. Res., 884-885 (2014) 273-276.

2013

[053] H.H. Kim, S.J. Lee, O.Y. Lee, Effect of Zr addition on mechanical properties of Cr-Mo plastic mold steels, Int. J. Chem. Mat. Sci. Eng., 7 (2013) 17-20.

[052] S.J. Lee, Predictive model for reheating austenite grain growth in alloy steels, ISIJ Inter., 53 (2013) 1902-1904.

[051] Y.W. Lee, Y.I. Son, S.J. Lee, Microstructure and mechanical properties of spheroidized D6AC steel, Mater. Sci. Eng. A, 585 (2013) 94-99.

[050] S.J. Lee, Evaluation of empirical kinetics models of athermal martensite transformation in plain carbon and low alloy steels, Adv. Mat. Res., 798-799 (2013) 39-44.

[049] S.J. Lee, K.S. Park, Prediction of martensite start temperature in alloy steels with different grain sizes, Metall. Mater. Trans. A, 44 (2013) 3423-3427.

[048] S.J. Lee, S. Lee, B.C. De Cooman, Martensite transformation of sub-micron retained austenite in ultra-fine grained Mn TRIP steel, Int. J. Mater. Res., 104 (2013) 423-429.

[047] S.J. Lee, C.J. Van Tyne, Grain size dependence of austenite decomposition in air cooled 16MnCr5 steel, Metall. Mater. Trans. A, 44 (2013) 2455-2460.

[046] S.M. Kwak, J.M. Doh, J.K. Yoon, S.J. Lee, I.J. Shon, Rapid synthesis and consolidation of nanostructured MgAl2O4 compound by pulsed current activated sintering and its mechanical properties, J. Ceram. Process. Res., 14 (2013) 65-69.

[045] L. Cho, S.J. Lee, M.S. Kim, Y.H. Kim, B.C. De Cooman, Influence of the gas atmosphere dew point on the selective oxidation and the reactive wetting during hot dip galvanizing of CMnSi TRIP steel, Metall. Mater. Trans. A, 44 (2013) 362-371.

[044] S.J. Lee, D.K. Matlock, C.J. Van Tyne, Comparison of two finite element simulation codes used to model the carburized steel, Comp. Mater. Sci., 68 (2013) 47-54.

2012

[043] H.S. Kang, H.K. Park, J.M. Doh, J.K. Yoon, S.J. Lee, I.J. Shon, Simultaneous synthesis and consolidation of a nanostructured Al2TiO5 compound by high-frequency induction heating, J. Ceram. Process. Res., 13 (2012) 751-755.

[042] C. Lee, D. Fan, I. Sohn, S.J. Lee, B.C. De Cooman, Liquid metal induced embrittlement of Zn-coated hot stamping steel, Metall. Mater. Trans. A, 43 (2012) 5122-5127.

[041] D. Kim, S.J. Lee, B.C. De Cooman, Microstructure of low C steel isothermally transformed in the MS-Mf temperature range, Metall. Mater. Trans. A, 43 (2012) 4967-4983.

[040] S.J. Lee, J. Mola, B.C. De Cooman, Conversion model for the martensitic transformation of banded austenite in a ferrite matrix, Metall. Mater. Trans. A, 43 (2012) 4921-4925.

[039] S.L. Du, S.J. Lee, I.J. Shon, Mechanical synthesis and pulsed current activated consolidation of nanostructured Fe3Al-Al2O3 composites and their mechanical properties, J. Ceram. Process. Res., 13 (2012) 509-513.

[038] L. Chen, S.J. Lee, B.C. De Cooman, Mechanical Properties of H-charged Fe-18Mn-1.5Al-0.6C TWIP Steel, ISIJ Inter., 52 (2012) 1670-1677.

[037] S. Lee, S.J. Lee, B.C. De Cooman, Reply to comments on “Austenite stability of ultra-fine grained transformation-induced plasticity steel with Mn partitioning”, Scr. Mater., 66 (2012) 832-833.

[036] I. Jung, S.J. Lee, B.C. De Cooman, Influence of the Al on internal friction spectrum of Fe-18Mn-0.6C TWIP steel, Scr. Mater., 66 (2012) 729-732.

[035] J. Lee, S.J. Lee, B.C. De Cooman, Effect of micro-alloying elements on the stretch-flangeability of dual phase steel, Mater. Sci. Eng. A, 536 (2012) 231-238.

[034] S.J. Lee, C.J. Van Tyne, A kinetics model for martensite transformation in plain carbon and low-alloyed steels, Metall. Mater. Trans. A, 43 (2012) 422-427.

2011

[033] S. Lee, J. Kim, S.J. Lee, B.C. De Cooman, Effect of Cu addition on the mechanical behavior of austenitic twinning-induced plasticity steel, Scr. Mater., 65 (2011) 1073-1076.

[032] S.J. Lee, D.K. Matlock, C.J. Van Tyne, An empirical model for carbon diffusion in austenite incorporating alloying element effects, ISIJ Inter., 51 (2011) 1903-1911.

[031] S. Lee, S.J. Lee, B.C. De Cooman, Work hardening behavior of ultrafine grained Mn transformation Induced plasticity steel, Acta Mater., 59 (2011) 7546-7553.

[030] E.J. Pavlina, S.J. Lee, E.T. Virtanen, L.M. Rothleutner, C.J. Van Tyne, Effects of copper on the hardenability of a medium-carbon steel, Metall. Mater. Trans. A, 42 (2011) 3572-3576.

[029] S. Lee, S.J. Lee, S.S. Kumar, K. Lee, B.C. De Cooman, Localized deformation in multi-phase, ultra-fine grained 6% Mn TRIP steel, Metall. Mater. Trans. A, 42 (2011) 3638-3651.

[028] S.J. Lee, J. Kim, S.N. Kane, B.C. De Cooman, On the origin of dynamic strain aging in twinning-induced plasticity steels, Acta Mater., 59 (2011) 6809-6819.

[027] S. Lee, J. Kim, S.J. Lee, B.C. De Cooman, Effect of nitrogen on the critical strain for dynamic strain aging in high manganese twinning-induced plasticity steel, Scr. Mater., 65 (2011) 528-531.

[026] J. Jung, S.J. Lee, Sungil Kim, B.C. De Cooman, Effect of Ti addition on micro-alloyed Nb TRIP steel, Steel Res. Int., 82 (2011) 857-865.

[025] J. Kim, S.J. Lee, B.C. De Cooman, Effect of Al on the stacking fault energy of Fe-18Mn-0.6C twinning-induced plasticity steel, Scr. Mater., 65 (2011) 363-366.

[024] S. Lee, S.J. Lee, B.C. De Cooman, Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning, Scr. Mater., 65 (2011) 225-228.

[023] S.J. Lee, D.K. Matlock, C.J. Van Tyne, Carbon diffusivity in multi-component austenite, Scr. Mater., 64 (2011) 805-808.

[022] S.J. Lee, S. Lee, B.C. De Cooman, Mn partitioning during the intercritical annealing of ultra-fine grained 6% Mn transformation-induced plasticity steel, Scr. Mater., 64 (2011) 649-652.

[021] S.J. Lee, C.J. Van Tyne, Prediction of martensite volume fraction in Fe-Cr-Ni alloys, ISIJ Inter., 51 (2011) 169-171.

2010

[020] S.J. Lee, K.D. Clarke, A Conversional model for austenite formation in hypereutectoid steels, Metall. Mater. Trans. A, 41A (2010) 3027-3031.

[019] S.J. Lee, K.D. Clarke, C.J. Van Tyne, An On-heating dilation conversional model for austenite formation in hypoeutectoid steels, Metall. Mater. Trans. A, 41A (2010) 2224-2235.

[018] S.J. Lee, E.J. Pavlina, C.J. Van Tyne, Kinetics modeling of austenite decomposition for an end-quenched 1045 steel, Mater. Sci. Eng. A, 527 (2010) 3186-3194.

[017] S.J. Lee, J.A. Ronevich, G. Krauss, D.K. Matlock, Hydrogen embrittlement of hardened low-carbon sheet steel, ISIJ Inter., 50 (2010) 294-301.

2009

[016] S.J. Lee, Y.M. Park, Y.K. Lee, Reverse transformation mechanism of martensite to austenite in a metastable austenitic alloy, Mater. Sci. Eng. A, 515 (2009) 32-37.

[015] S.J. Lee, Y.K. Lee, Latent heat of martensitic transformation in a medium carbon low alloy steel, Scr. Mater., 60 (2009) 1016-1019.

[014] J.S. Park, Y.S. Ha, S.J. Lee, Y.K. Lee, Dissolution and precipitation kinetics of Nb(C,N) in austenite a low carbon Nb-microalloyed steel, Metall. Mater. Trans. A, 40 (2009) 560-568.

[013] M. Jung, S.J. Lee, Y.K. Lee, Microstructural and dilatational changes during tempering and tempering kinetics in martensitic medium carbon steel, Metall. Mater. Trans. A, 40 (2009) 551-559.

[012] S.J. Lee, Y.K. Lee, Erratum to “Finite element simulation of quench distortion in a low alloy steel incorporating transformation kinetics” [Acta Mater 2008;56:1482–90], Acta Mater., 57 (2009) 2605.

2008

[011] S.J. Lee, Y.K. Lee, Finite element simulation of quench distortion in a low alloy steel incorporating transformation kinetics, Acta Mater., 56 (2008) 1482-1490.

[010] S.J. Lee, Y.K. Lee, Prediction of austenite grain growth during austenitization of low alloy steels, Mater. Design, 29 (2008) 1840-1844.

[009] S.J. Lee, J.S. Park, Y.K. Lee, Effect of austenite grain size on the transformation kinetics of upper and lower bainite in a low alloy steel, Scr. Mater., 59 (2008) 87-90.

2007

[008] H. Zhao, S.J. Lee, Y.K. Lee, X. Liu, G. Wang, Effects of the applied stresses on martensite transformation in AISI 4340 steel, J. Iron Steel Res., Int., 14(6) (2007) 63-67.

[007] S.J. Lee, Y.K. Lee, Thermodynamic formula for the Acm temperature of low alloy steels, ISIJ Inter., 47 (2007) 769-771.

[006] S.J. Lee, M.T. Lusk, Y.K. Lee, Conversional model of transformation strain to phase fraction in low alloy steels, Acta Mater., 55 (2007) 875-882.

2006

[005] M. Jung, S.J. Lee, Y.K. Lee, Tempering kinetics of S45C martensitic steel, Solid State Phenomena, 118 (2006) 375-380.

[004] S.J. Lee, Y.K. Lee, A computational model for phase transformation - temperature - distortion coupling of AISI 5120 steel, Solid State Phen., 118 (2006) 387-392.

2005

[003] I.J. Shon, S.J. Lee, Y.S. Seo, Y.K. Lee, Y.H. Jeong, C.S. Choi, Effect of initial structure on recrystallized austenite grain size of Fe-32%Ni alloy, Mat. Sci. Forum, 475-479 (2005) 175-178.

[002] S.J. Lee, Y.K. Lee, Effect of austenite grain size on martensitic transformation of a low alloy steel, Mat. Sci. Forum, 475-479 (2005) 3169-3172.

[001] S.J. Lee, Y.K. Lee, Quantitative analyses of ferrite lattice parameter and solute Nb content in low carbon microalloyed steels, Scr. Mater., 52 (2005) 973-976.